Industry Roofing CollectiveGet matched with vetted Industry roofers in minutes.(626) 990-2809Price my roof

What roofing costs in Industry

Ranges rather than prices, because nobody can price a roof they have not stood on. They are here so a quote that is well outside them prompts a question.

Or call (626) 990-2809

Get tile roof quotes

No cost to you. Contractors pay us, you do not.

Or call (626) 990-2809

No cost · No pressure

Get tile roof quotes

No cost to you. Contractors pay us, you do not.

Step 1 of 6

What best describes your home?

Different buildings need different crews, so this is the first thing a roofer asks.

Free, fast, and no obligation to hire anyone.

Full replacement, typical home$12,500 to $33,000Estimated installed range in Industry for a single-family roof.
Per square, architectural asphalt shingle$625 – $950One square is 100 square feet of roof surface.
Emergency tarp-over$400 – $1,200Stops the water tonight. It is not a repair.

These are estimated ranges, not quotes. Compiled from public installed-cost data for California and adjusted for how Industry is built. No contractor is bound by them, and nobody can price a roof they have not stood on.

What a roof looks like as a monthly payment

Straight amortisation on the amount and rate you type in. Nobody is offering you these terms, us least of all — this is the arithmetic so you can check whatever a lender or a contractor does offer.

Prefilled with the middle of the typical Industry replacement range. Change it to whatever you have been quoted.

Roofing paper commonly lands somewhere between about 7% and 18% depending on credit and on the programme. Put in the number you have actually been given.

Try:

Monthly payment by term, at the amount and rate above. Illustrative only.
TermPer monthInterest paidTotal paid
3 years36 payments
5 years60 payments
7 years84 payments
10 years120 payments
15 years180 payments

The assumptions, in full

  • A fixed rate, equal payments, and interest compounded monthly. Nothing is deferred and nothing balloons at the end.
  • No down payment, no dealer or origination fee, no prepayment penalty, and no insurance product added on. Real roofing finance often carries a dealer fee, and it is usually already inside the price you were quoted.
  • Promotional "same as cash" and zero-interest offers work differently: the interest is typically owed retroactively if the balance is not clear by the deadline. This table does not model that.
  • The prefilled amount is the middle of the typical replacement range for Industry from public cost data. It is not a quote for your roof.

Get quotes to put a real number in it

Industry roofing prices, in plain numbers

Estimated installed ranges for a typical 27-square roof in Industry — around 2,700 square feet of roof surface. These are guidance, not quotes.

Architectural asphalt shingles running up to a capped ridge on a residential roof
Architectural asphalt shingle with a capped ridge
Grey standing-seam metal roof panels running to the ridge
Standing-seam metal, with concealed fasteners at each rib
Dark modified-bitumen cap sheet on a flat roof with a parapet edge
Modified bitumen cap sheet on a flat roof

Illustrative photographs of roofing work in general. Not photographs of jobs arranged through this site.

Installed cost ranges, Industry, CA. One square = 100 square feet.
CoveringPer squareTypical whole roofExpected life
Architectural asphalt shingleThe default choice on most American homes, and usually the right one.$625 – $950$12,500 – $32,50025 to 30 years
3-tab asphalt shingleThe cheapest thing that still counts as a roof. Fewer and fewer crews will install it.$500 – $700$10,000 – $24,00015 to 20 years
Impact-rated asphalt shingleClass 4 rated. Often earns an insurance discount where hail is a factor.$825 – $1,300$16,500 – $44,00025 to 35 years
Concrete tileThe tile lasts far longer than the underlayment beneath it, which is the catch.$1,200 – $2,000$24,000 – $68,00040 to 60 years
Clay barrel tileOften salvaged and re-laid over new underlayment rather than replaced.$1,600 – $3,100$32,000 – $105,50050 to 80 years

What moves the number

  • Whether the valleys, drip edge and step flashing are being replaced or reused
  • The number of penetrations: chimneys, skylights, vents, solar mounts
  • Warranty tier, which is really a question about who honours it in fifteen years
  • Permit and inspection fees, which vary more between towns than people expect
  • Pitch — anything over about 7:12 needs staging and slows a crew down

Common repairs

Emergency tarp-over$400 – $1,200
Small leak, flashing or a few shingles$450 – $1,300
Valley, chimney or skylight reflash$900 – $2,900
Section replacement, one slope$1,400 – $5,100

What is behind these figures. National installed ranges, adjusted for California labour and material costs and for how Industry is actually built. They are a sanity check on the quotes you receive, nothing more. No contractor is bound by them.

Extras that turn up on quotes

ItemTypical rangeNotes
Roof inspectionFree – $473Frequently free when it is tied to an estimate. Paid inspections buy you a written report you can hold somebody to.
Tear-off, per layer per square$142 – $283Two old layers costs roughly twice what one does to remove and tip.
Seamless aluminium gutter, per foot$12 – $27Most homes run 160 to 220 feet.
Ridge and intake ventilation upgrade$591 – $2,389The cheapest thing you can do to make the next roof last its full life.
Tile lift-and-relay, per square$682 – $1,293Existing tile comes off, new underlayment goes down, the same tile goes back.
Skylight replacement, each$1,224 – $3,375Cheaper done during a re-roof than on its own afterwards.

Cost questions

Are you a roofing company?

No, and it matters that we say so. We are a referral service, not a contractor. The roofing work, the licence, the insurance and the warranty all sit with the independent company you choose.

Are gutters included in a re-roof?

Normally a separate line. It is the one add-on that genuinely costs less when done at the same time.

What happens to my information?

It goes to a maximum of three roofing contractors working in Industry, and to nobody else. We do not sell it as a mailing list and we do not post it anywhere public. Our privacy policy sets out exactly what is shared.

It is leaking right now. What do I do?

Contain the water, photograph everything, and get the request in marked as an emergency. A tarp is the right first job. The permanent repair is a separate conversation and a separate price.

Why three quotes and not one?

One quote is a number with no context. Three gives you a range, and the conversation about why they differ is where you learn what you are actually buying.

Start with a free estimate

It is free, and nothing obliges you to hire anyone.

(626) 990-2809Call nowPrice my roof